Our stainless steel wire has a diameter from 0.035mm to 2.00 mm.
You can order it soft or hard.
The lubrication will be done according to your wishes and the coils comply with DIN standards.
This is the standard grade of austenitic stainless chromium-nickel steels and the first commercially available stainless steel (currently accounting for 33% of total production). It is a steel with moderate corrosion resistance and good cold formability. The relatively high carbon tolerance poses a certain risk of chromium carbide formation at grain boundaries during heat treatment, which reduces resistance to intergranular corrosion. Solution annealing is then necessary to dissolve the carbides, followed by rapid quenching to prevent any new precipitation.
For critical applications, 304L steel with a low carbon content is preferable. In environments containing chlorine or salt water, or for products in constant contact with the skin, 316L steel containing molybdenum is more suitable. Severe deformation can cause the steel to become slightly magnetized. This steel is not easy to machine.
It is weldable with and without filler material.
General Properties:
Corrosion resistance - Good
Mechanical Properties – Average
Forgability – Good
Weldability – Excellent
Machinability – Moderate
Main application:
Automotive industry, construction industry, chemical industry, decorative purposes and kitchen furnishings,
Electronic equipment, food industry, mechanical engineering
An austenitic chromium-nickel steel with a slightly lower carbon content, which provides increased resistance to intergranular corrosion. The mechanical properties of 1.4301 and 1.4307 are nearly identical; only the strength values of 1.4307 are slightly lower due to its reduced carbon content.
Material No. 1.4307 is a higher grade material than No. 1.4301. Material No. 1.4307 can be substituted for Material No. 1.4301, but not vice versa.
General Properties:
Corrosion resistance - Good
Mechanical Properties – Average
Forgability – Good
Weldability – Excellent
Machinability – Moderate
Main application:
Automotive industry, construction industry, chemical industry, decorative applications and kitchen furnishings, electronic equipment
Food industry, mechanical engineering
Low-carbon austenitic chromium-nickel-molybdenum stainless steel.
Due to its molybdenum content, the material exhibits improved chemical resistance. It cannot be heat-treated.
This steel is easy to form and weld, but it is not easy to machine.
This steel complies with the EN 1811 standard and is suitable for products that come into prolonged contact with the skin.
Suitable for mechanical components with increased corrosion resistance requirements, particularly in chlorine-containing media.
General Properties:
Corrosion resistance – Very good
Mechanical Properties – Average
Forgability – Good
Weldability – Excellent
Machinability – Moderate
Main application:
Automotive industry, construction industry, chemical industry, decorative applications and kitchen fixtures, electronic equipment, oil and gas industry/petrochemical industry, food industry, aviation, mechanical engineering, medical and pharmaceutical industry
The corrosion resistance of 316Ti is neither better nor worse than that of 1.4404. The use of 1.4571
compared to 1.4404 is only justified if high-temperature strength is required
General Properties:
Corrosion resistance – Very good
Mechanical Properties – Average
Forgability – Good
Weldability – Excellent
Machinability – Fair to Poor
Main application:
Equipment and piping construction, construction industry, chemical industry, food industry, mechanical engineering, medical and pharmaceutical industry, shipbuilding
Grade 1.4828 / AISI 309 is a heat-resistant austenitic chromium-nickel stainless steel.
Scale-resistant up to 1000°C. Low resistance to oxidizing sulfur-containing gases.
General Properties:
Corrosion Resistance - Low
Mechanical Properties – Average
Forgability – Good
Weldability – Good
Spannability – Good
Main application:
Apparatus construction for high-temperature applications, automotive industry, chain industry, mechanical engineering, furnace construction, sieves and grates
Stainless ferritic chromium steel, magnetically attractable but not hardenable.
This steel is less corrosion-resistant than most 300 series (AISI) austenitic steels.
General Properties:
Corrosion resistance - Good
Mechanical Properties – Average
Forgability – Good
Weldability – Poor
Machinability – Moderate
Main application:
Construction industry, Decorative purposes, Electronic equipment, Food industry.
Our copper wire is made of 99.9% % electrolytic copper (CuETP1).
You can order the copper wire in bare, tinned, and gold-cemented.
You can choose a diameter from 0.05 mm to 2.50 mm.
The coils comply with the DIN standards.
Copper bare
| Copper wire | Cu – ETP1 (according to DIN EN 13602) |
| E-Cu 58 (according to DIN 40 500) | |
| Material | CW003A (according to DIN EN 13602) |
| 2.0065.10 (according to DIN 40500) | |
| Conductivity | 58.5 m/(Ω⋅mm²) |
| Density | 8.925 kg/dm³ |
Tinned copper
| Copper wire | Cu – ETP1 (according to DIN EN 13602) |
| E-Cu 58 (according to DIN 40 500) | |
| Material | CW003A (according to DIN EN 136002) |
| 2.0065.10 (according to DIN 40 500) | |
| Zinn | Tin 99.90 (according to DIN 1704) |
| Tin plating | according to DIN EN 13603 |
| Conductivity | 58.5 m/(Ω⋅mm²) |
| Density | 8.925 kg/dm³ |
Plastic spools
| Coil designation | DIN / Standard | Flange diameter in mm | Core diameter in mm | Recording Ø in mm | Filling weight in kg |
| 100,000 | 46399 | 100 | 63 | 16 | 1,6 |
| 125,000 | 46399 | 125 | 80 | 16 | 3,5 |
| 160,000 | 46399 | 160 | 100 | 22 | 7,5 |
| 200,000 | 46399 | 200 | 80 | 22/36 | 14 |
| 250,000 | 46399 | 250 | 160 | 22/127 | 18-20 |
Soft wires
tinned wires
| Wires Ø | Cross-section | Electrical resistance | Stretch | Electrical resistance | Stretch |
| 0.05 mm | 0.002 mm² | 8703,866 Ohms/km | 10 % | 8780.260 Ohms/km | 7 % |
| 0.07 mm | 0.004 mm² | 4440.748 Ohm/km | 10 % | 4479.724 Ohms/km | 7 % |
| 0.10 mm | 0.000008 mm² | 2175.966 Ohms/km | 15 % | 2195.065 Ohms per kilometer | 13 % |
| 0.12 mm | 0.011 mm² | 1511.088 Ohm/km | 15 % | 1524.351 Ohms/km | 13 % |
| 0.14 mm | 0.015 mm² | 1110,187 Ohm/km | 15 % | 1119.931 Ohms/km | 13 % |
| 0.15 mm | 0.018 mm² | 967,096 Ohms/km | 15 % | 975.584 Ohms/km | 13 % |
| 0.16 mm | 0.000031 in² | 849,987 Ohms per kilometer | 15 % | 857,447 Ohms per kilometer | 13 % |
| 0.18 mm | 0.025 mm² | 671,595 Ohms per kilometer | 21 % | 677,489 Ohms per kilometer | 19 % |
| 0.20 mm | 0.031 mm² | 543,992 Ohms per kilometer | 21 % | 548,766 Ohms/km | 19 % |
| 0.22 mm | 0.038 mm² | 449,580 Ohms/km | 21 % | 453,526 Ohms per kilometer | 19 % |
| 0.23 mm | 0.042 mm² | 411,336 Ohms per kilometer | 21 % | 414,946 Ohms/km | 19 % |
| 0.25 mm | 0.000049 in² | 348.155 Ohms/km | 21 % | 351,210 ohms per kilometer | 19 % |
| 0.26 mm | 0.053 mm² | 321,889 Ohms per kilometer | 21 % | 324,714 Ohms per kilometer | 19 % |
| 0.28 mm | 0.0000961 sq mi | 277,547 Ohms/km | 21 % | 279.983 ohms/km | 19 % |
| 0.30 mm | 0.071 mm² | 241.774 ohms/km | 21 % | 243,896 Ohms per kilometer | 19 % |
| 0.35 mm | 0.096 mm² | 177,630 Ohms/km | 22 % | 179.189 Ohm/km | 20 % |
| 0.40 mm | 0.126 mm² | 135.998 ohms/km | 22 % | 137.192 Ohm/km | 20 % |
| 0.50 mm | 0.196 mm² | 87.039 ohms/km | 22 % | 87.803 ohms/km | 20 % |
| 0.60 mm | 0.283 mm² | 60,444 Ohms/km | 24 % | 60,974 Ohms/km | 22 % |
| 0.80 mm | 0.503 mm² | 33,999 Ohms per kilometer | 24 % | 34,298 Ohms per kilometer | 22 % |
| 1.00 mm | 0.785 mm² | 21,760 Ohms per kilometer | 24 % | 21,951 Ohms/km | 22 % |
| 1.20 mm | 1,131 mm² | 15.111 Ohms per kilometer | 26 % | 15.244 ohms/km | 24 % |
| 1.40 mm | 1,539 mm² | 11.102 ohms/km | 26 % | 11,199 Ohms per kilometer | 24 % |
| 0.06 inches | 2,011 mm² | 8,500 Ohms per kilometer | 28 % | 8.574 Ohms/km | 26 % |
| 2.50 mm | 4,909 mm² | 3,482 Ohms per kilometer | 28 % | 3,512 Ohms/km | 26 % |
Our aluminum wire complies with the EN AW5754 standard. The spools comply with DIN standards.
Properties
– suitable for welding
– easily moldable
– easy to anodize
seawater resistant
Strength up to 300 MPa
Application
Vehicle manufacturing
– Machine and Equipment Manufacturing
Container Construction
Shipbuilding
Food industry
– Temperature insert up to 120°C
Our galvanized iron wire is electro-galvanized or hot-dip galvanized.
You can order it in a diameter of 0.15 mm to 1.50 mm.
It is also available in oiled and dry finishes.
For your production, the galvanized iron wire is very smooth and has a drawable surface.
The coils comply with the DIN standards.
Our wire is evenly coated with a high-quality oil.
A precision-controlled pump distributes the oil onto the wire.
Before
After
